Sea Flush fits popular sea strainers with inside openings that range from 1.6" to 5" This covers the vast majority of sea strainers on the market including Perco and Groco. The snorkel is not included with this kit, it can be purchased separately.
Posted by M. Ferry on 24th Sep 2016
I used the seaflush to blow mud out of all my sea port valves through the sea strainers. Just like the video showed it worked great. I then added barnacle buster (2 gallons per engine at the sea strainer. After 1 hr I started my engines and the water was black coming out of the exhaust. The engines are actually running 6 to 10 degrees cooler.
Posted by Unknown on 30th Jun 2016
The product is not revolutionary but is well made and makes the job of flushing the engine, or just running it on the hard , easier. The additional snorkel is a clever variant. It allows for blowing out clogs or sucking in antifreeze.
The plastic appears to be long lasting.
I'm happy with the purchase.
Posted by Unknown on 24th Feb 2016
Works as advertised in my Carver 406. A little tight fit because of wiring above the sea strainer for the generator, but it did fit. It is still helpful to have two people doing the winterization. I ran 5 gallons through each engine with my son monitoring and topping up the fluid while I was running the engines from the bridge. For the generator and air conditioners, I monitored for pink fluid from the discharge ports while he ran the equipment and kept fluid topped up. All in all a very simple project.
Posted by GH on 30th Dec 2015
My Dad saw a demonstration at the Annapolis Boat Show and took the Sea Flush literature with him. When it came time for me to winterize he showed me what he had and said I should look in to the Sea Flush kit. I read the pamphlet, watched the YouTube videos, and pulled the trigger. I placed the order Sunday evening and it was at my door by the time I arrived home from work Tuesday. Using the snorkel and a 5 gallon bucket, I had both of my engines done within minutes. The only hiccup I had was my paper towel gasket wasn’t done to proper specs and I had to re-engineer a new one to create the needed vacuum. I have a slight overheating problem with my starboard engine, so a spring purchase will definitely be Barnacle Buster….the rest of the kit worked so well I’ m hoping to save some money with this easy solution.
Posted by TJ on 3rd Dec 2015
I saw a small ad of Sea Flush on Power and Motor Yacht magazine and I was intrigued. Then I watched the Youtube video and found out about the "Snorkel". I liked what I saw and decided to give it a try, so I bought both of them. They worked very well, and it was beyond my expectation. My boat has a pair of Cummins diesels and a 12.5K Westerbeke genset so I used a 5 gallon bucket with them. Great products!
Posted by Ray on 2nd Dec 2015
Just finished winterizing our trawler, took one hour, that's the Yanmar engine, generator, and A/C and the wash down system. Never had any mess of spillage. Used a five gallon bucket and the hose system. Had to loan it out to my fellow boaters, they all loved it.
Posted by John on 19th Nov 2015
I have the sea flush and snorkel (recommended) and love it.
Works as advertised. But I would suggest that people use the paper towel barrier as mentioned in the instructions.
You can winterize A/C and Genny on the water, maybe more, buts that's all I needed.
I won't be loaning it out. :)
Posted by Bob M. on 18th Nov 2015
Great tool, this was my frist winter with my new boat , with central air, generator, and two engines. Save myself over $ 1,000 in service changes.
Posted by Unknown on 18th Nov 2015
product worked well on my 410 Sea Ray with 454 gas engines and Westerbeke generator.
Posted by Mike on 30th Oct 2015
Great Product, saved time and effort winterizing our 1998 Carver 355 Motor Yacht